Kitchen Faucets Bathroom Faucets Single Handle Solid Alloy Can Pull Out & Lift Faucets for Bathroom Kitchen on Clearance

Bathroom Faucet Single Handle Solid Zinc Alloy Single Handle Faucet Can Pull out & Lift Faucets for Bathroom Kitchen Specification: Product Name: Faucet Product color: Black Material: Zinc alloy Net weight: 4.22lbs(1.92kg) Gross weight: 4.90lbs(2.23kg) Product Dimensions:9.06x 5.90x1.77 inches (23x15x4.5cm) Packing size: 19.69x9.45x 2.76 inches (50x24x7cm) Features: Easy to Operate---Single handle control water temperature and flow volume easily high arc 360 degree swivel spout supply full range washing access sprayer head always retract back to spout after each use.3.15inch free lifting height. Easy to Maintenance---Electroplating superior corrosion & rust-resistant finish prevent dirty from sticking to faucet surface clean faucet by cloth is enough in daily use. Three ways adjusted :Rotate the bubbler to switch the outlet mode including DC mode spray mode and press the button to switch the upper spray outlet - gargle mode HEALTHY QUALITY - Zinc alloy construction has NO WORRY of LEAD. Ceramic disc valves exceed industry longevity standards ensuring durable performance for life. High performance aerator. EASY INSTALLATION - 1 or 3-hole installation 9/16 water hoses and mounting hardware included. Easy DIY installation less than 25 minutes. Attention: Not included D-eck plate and drainer Package Include: 1x faucet 1x sealing ring 1x shank 1x rubber mat 1x washer 1x lock mut 1x cold/hot inlet hose 1x pull rope 1x gravity drop Installation Note: Applicable pressure: 0.05-0.6mpa Aperture: Φ32-35mm/Φ1.26-1.38inch Length of water inlet pipe: 60cm/23.62inch Length of nylon pull rope:140cm/55.12inch Handle Location:Single-Hole D-eck-Mount Nominal pressure: 0.6Mpa Work pressure: 0.05Mpa-0.6Mpa Two flexible Hoses (Hot and cold) and 9/16 female thread V-alve core: Ceramic 1.The main body of the faucet has been tested and adjusted at the factory please do not disassemble it by yourself； 2.Before installing the water nozzle please first remove the impurities and sludge in the pre- embedded water pipe to avoid blocking the water nozzle and affect the water discharge. 3.After installation please confirm the joints are tightly connected and the pipeline without leaking . 4.The sizeof the tablemounting hole suitable for the installation of this product ：Φ32-35mm/Φ1.26-1.38inch 5. When installing and using the water nozzle please use normal torque to prevent the handle screw and other parts from breaking 6. Please open cold water first when using then turn on hot water to adjust temperature to avoid burns； all kinds of water nozzles are adjusted according to red and blue signs red is hot Water direction blue is cold water direction and your double pipes should be installed coordinate with these. 7. Users should protect the faucets if as cement lime slurry sand that contaminates the surface .It must be cleaned within 30 minutes. 8. Important: Before supply lines connection please turn on hot and cold water supplies and flush water lines for one minute. This flushes away any debris that could cause damage to internal parts. And then you can connect supply lines and slowly turn on the water check all the connections for leaks.