JHEMCU ELRS-2G4-P 2.4GHz ExpressLRS ELRS 5 PWM Output Long Range Mini RC Receiver for RC Drone

SpecificationsESP8285 SX1280 1281Antenna connector IPEX MHF 15x PWM outputsRF Frequency 2 4GHz 2400 2480MHz PWM frequency 50HzTelemetry power 12dbmReceiver protocol PWM or CRSFInput voltage 4 10V DC 5 pad as VCCPower dissipation 45mA binding 85mA wifi mode PCB size 25mm x 13mmWeight 2g w antennaFirmwaresExpressLRS MATEK 2400 RX PWM or DIY 2400 RX PWMP PWM receiver via 1 5 PWM outputs 4x full resolution channels CH1 4 1x switch channels CH5 as AUX1 ExpressLRS JHEMCU EP24S 2400 RX CRSF Serial receiver via TX CH2 and RX CH3 Firmware update via UART or WIFIMake sure Receiver and TX module both are running ExpressLRS 2 0Traditional BindingReceivers have ExpressLRS fw V2 0 preloaded without BINDING PHRASE1 Power on and off your receiver three times After brushing the firmware the first power on will automatically enter binding mode 2 Make sure the LED is doing a quick double blink which indicates the receiver is in bind mode3 Use the BIND button on the Transmitter Lua script which sends out a binding pulse4 Receiver will switch to slow blink once it has received binding pulse 5 Power off and power on receiver again If the receiver LED switch to solid on from slow blink it s bound with your transmitter Flashing with ELRS configuratorMATEK 2400 RX PWM or DIY 2400 RX PWMPIf use it as normal Serial receiver flash it with Target JHEMCU EP24S 2400 RXFlashing with ESP NodeMCU PyFlasher1 Connect receiver to USB TTL module RX TX TX RX 5V 5V G GND 2 Conne