Iwata Medea Super Lube, Clear, 0.34Oz

Iwata Medea Super Lube is essential for good maintenance of your Iwata airbrush or any other airbrush to keep parts moving smoothly. Iwata Lube can be used on all moving parts. In particular apply it to: main lever needle packing valve-piston packing along the needle and in the needle cap to enhance paint flow and prevent the tip drying Iwata Medea Super Lube: is non-toxic is silicon-free has no evaporative qualities maintains viscosity in all environments Make sure you do not use silicon-based lubricants in your airbrush trigger and air valve as anything with silicon can damage the look of your work. Clear coat runs away from silicon and can lead to paint not sticking properly, not spraying right, or fish eye finish. For preventative maintenance or if your airbrush's main lever isn't moving backward and forward smoothly: Remove the handle and needle from the airbrush. Place only one drop of Iwata Lube where the taper of the needle begins. Spread evenly around tapered edge. Then reinsert the needle. This will deliver the lubricant to the needle packing. Reassemble the airbrush. If your airbrush's main lever sticks or is slow to rise: Remove the needle and handle from the airbrush. Depress and pull back the main lever then apply one drop of Iwata Lube to the base of main lever stem. This will lubricate the air valve O-ring. Reassemble the airbrush. Store airbrush upright for 12 hours for best results.