Insta360 ONE & ONE X Camera Drone Pylon Car DVR Accessories for MAVIC PRO 2

Feature: 1. Mounting (lower) bracket can take the panoramic view below the aircraft without blocking, but take off and land need to lift by hand or find a frame support, this shop does not provide such equipment 2. This product uses 3D printing technology, environmentally friendly plastic material, health and environmental protection, free of charge screws, nuts, tools. 3. Joint design (the joint can be freely removed for installation) not only easy to carry but also adjust the camera position. 4. The net weight of the product is about 65g, which is light in weight and minimizes the weight of the aircraft while providing the camera mounting platform. 5. Support 360 degree camera with tripod 1/4 nut hole and motion camera 6. Material: environmentally friendly plastic material 7. Weight: about 65g Note: 1. When using the lower mounting bracket, be sure to pay attention to the pole slightly forward, avoiding the obstacle to the lower obstacle, resulting in constant climbing or falling bomber 2. Give 2 shims to prevent the screws at the camera from loosening. You can also purchase the screws and other products to reinforce the screws to prevent the camera from falling. 3. Since the panoramic camera is different, it is recommended that after getting the product, first assemble and debug the low-fly debugging. Remember to be careful during the debugging process. If vibration is encountered during the debugging process, use the rubber band to tie the board to the body. More tight, stable and then fly normally Package Included: 1 X Camera Drone Pylon