IR Infrared Module Body Sensor Intelligent Light Motion Sensing Switch

Specifications: Color: White Quantity: 1 pc Voltage: AC 180V-240V Output: Relay Load power: 200W Induction distance: 3m - 8m Induction angle: 120 Light intensity of illumination: 6 Lux Time extension: 30s10s Switch Dimension:7.45 x 3.85 x 2.8cm / 2.93 x 1.51 x 1.1" Features: (1)Infrared technology based automatic motion sensor switch. (2)Automatic turn ON/OFF while detected people come or left. (3)Automatic locked in day time to save energy. (4)Sensitive control,not the next day or light sensors,at night or in low light senses. (5)Automatic Delay - After the switch is turned on, if a person within the scope of activities of the sensing switch has been turned on;if people leave the sensor range stated last time before leaving as a reference point,the start delay. By adjusting the delay time of the switch resistance set the time. Usually about 20 seconds - 40 seconds (6)Easy to install or replace existing switch. Instructions for use: 1.Please click on the housing according to the wiring diagram switch installed, one minute after power initialization time, in the initialization time for the uncertain state of the switch-off will flash three times in a row, after a minute into the normal working state, such as during the day to check whether the switch normally covered by hand or with a black object file live switch, so that the light dimmed, lights can be turned on. 2.Delay and sensitivity is factory set delay time and luminosity prevail, the switch can not adjust the delay time and the luminosity 3.When installing the switch, do not switch installed in the direct glare and location of the import and export of hot and cold air, not loaded too much noise in the environment. Otherwise they will be false signal lights, can not achieve energy savings. 4.This switch allows parallel access, but must pay attention to the power problem, the product can not be greater than the specified load. The load power switch on the standard test are normal, lower than the standard load power to extend the life of the switch. Considerations: Disconnect the power supply during installation to ensure safety Prohibit the use of more than power range Can not be installed to water pour location Detection range with changes in ambient temperature changes.Summer detection distance is relatively short,Winter detection distance farther. Can not be installed at the location below -20 degrees and above 60 degrees Do not place in direct sunlight Not recommended to be installed in a position of moving objects Package Includes: 1 x IR Infrared Body Intelligent Sensor Light Sensing Switch