IP65 Z Axis Zero Setter Tool Pre Setter 50±0.001mm Digital Display CNC Tool Setting Instrument for CNC Router Photoelect

Description IP65 Z Axis Zero Setter Tool Pre Setter 500 001mm Digital Display Tool Setting Instrument for CNC Router PhotoelectricSpecification ON OFF ZERO Short press this button to start and zero setting long press for 3 seconds to shut down Powered by a CR2032 3V button battery No include Body height 50mm Range 0 2 5mm Reading resolution 0 001mm Accuracy error 0 005mm Features Large screen LCD display clear and easy to read Z axis setter is a hardware tool used to calibrate and set the length of CNC machine tools The set height is 50 000 01mm Magnet design non slip and easy to fix Instructions 1 Before using press the cutter shaft a few times to check whether the slide is smooth 2 Wipe the bottom of the tool setting tool with the clean and soft cotton cloth and the zero base surface 3 Wipe the workbench or workpiece that needs to be determined to the distance of the tool tip 4 Place the tool setting tool upside down on the workbench or flat surface and press down gently to ensure that the zero setting base surface and the work table or plane are completely fitted Press the ON OFF ZERO key to set the zero position 5 After the zero position is set set the tool setting tool on the table or workpiece plane directly below the machine tool tip move the tool tip slowly down touch the surface of the tool axis and continue to slowly adjust downward until the LCD The degree on the display is 0 00mm At this time the distance from the tip to th