IMSHIE Non-Contact Liquid Level Sensor Liquid Level Switch Induction Switch Detector For Industrial Production Aquarium Liquid Agriculture Gardening big sale

Description: The non-contact liquid level sensor can only be installed and used in non-metallic containers or pipes such as plastic glass ceramic etc. Installed on the outer wall of the container it does not need to be in direct contact with the liquid to be tested will not be corroded by strong acids and alkalis and will not be affected by scale. After installation due to the different thickness of the container if you need to adjust the detection sensitivity of the sensor you can open the QC label fix the sensor on the container or pipe under test adjust the liquid level to the position that needs to be sensed and then press the small circle Press the button in the hole for about 3 seconds until the blue status indicator light flashes release the button at this time and then the liquid level can be sensed when it rises to the vicinity of this position. Specifications: Switch model: WS03M Switch name: Non-contact Liquid Level Sensor Working voltage: DC5-24V Output voltage Vol (Lo): 0.5V Output current Iol (Lo): 300mA Current consumption: 5mA Response time: 0.5 seconds Working temperature: 0~60°C Switch line length: 1.5m Bracket type: A type/B type/C type (A plane bracket B tube diameter 8-12mm bracket C tube diameter 12-26mm bracket) Specification size: length width and thickness about 30*19*10mm/1.18*0.75*0.39in Installation method: bracket fixed installation Packing List: 1x Non-contact Liquid Level Sensor Note: Please allow slight tolerances in size due to manual measurement and lighting in photography may result in difference in color than it is in real life.