I5 6 inch Car HUD Head Up Display OBDII Interface

I5 6 inch Car HUD Head Up Display OBDII Interface Feature: 1. Detecting car's OBDII interface automatically and all car with OBD II or EUOBD are OK, plug and play; 2. Car speed, engine speed, water temperature, voltage/ throttle position/ Ignition angle/ one-hundred-kilometer acceleration time, instant fuel consumption, average fuel consumption, mileage, fuel shortage reminding, engine faulty, shift reminding, etc. are displayed; 3. Normal display mode, high-speed display mode and automatic display mode are set by yourself; 4. Kilometers and miles are free to switch, which greatly facilitates the dashboard of British Standard; 5. 6 inches display area, easy to read; 6. Switch on and off automatically, HUD start when car starting HUD shutdown when the engine is turning off to protect the car battery effectively; at the same time, you can switch on and off HUD by Manually Shutdown to protect the battery safety; 7. Single-stage and four-stage overspeed alarm for driving safely; 8. Engine speed alarming so that you can shift timely to save fuel, also has a special significance for the novice; 9. Automatic and manual brightness adjustment mode, no dazzling; 10. Compass (this function is optional) the precise position, car does not get lost; Accurately determining the position and not get lost. Installation Instruction: 1. Make sure if your car complies with OBD II (or EU OBD) interface standard; 2. Open up the engine hood and look for the OBDII sticker. If there is a sticker of "OBDII CERTIFIED" then you can use our HUD. You can also check if your car have a diagnostic Interface(the vast majority of cars made in china after 2006 have the diagnostic Interface). 3. If your car has a diagnostic Interface of 16PIN(Figure 3) then plug the OBDII cable with the diagnostic Interface of 16PIN. 4. Put the non-slip mat on the relatively flat position of the car console. Then you put HUD on the non-slip mat and adjust HUD. 5. Reflective film can be attached to the front windshield above HUD so that you can read the parameters form the reflective film. Remarks: tips of sticking the reflective film A. Firstly spray some water on the position of sticking the reflective film; B. Remove the protective layer of the film, then attach to the corresponding position; C. Adjust the location, then use a small scraper or a smooth object to scrape the surface of the film; D. After a few minutes, the moisture will evaporate, then gently wipe off the water droplets and dust. 6. Power-on test You switch on HUD and HUD shows the current car voltage. Then HUD searches the car computer system. If HUD displays data, such as car speed, engine speed etc, it indicates that the product has been installed successfully. Technical Indicator: Ambient Temperature - 40 ~ + 80 Relative Humidity 10% ~ 95% Environmental Noise 60 db (A) Alarm Sound Level 30 db (A) Working Voltage 9V ~ 16VDC (12Vdc/400mA) Size 155 * 93 * 15.7 (mm) Product Weight 80g Package Included: 1 X I5 6 inch HUD Head Up Display