Holybro Pixhawk 4 Mini Autopilot Flight Controller M8N GPS Module PM06 Power Management for RC Drone

Holybro Pixhawk 4 Mini Autopilot Flight Controller M8N GPS Module PM06 Power Management for RC DroneDescription The Pixhawk 4 Mini autopilot is designed for engineers and hobbyists who are looking to tap into the power of Pixhawk 4 but are working with smaller drones Pixhawk 4 Mini takes the FMU processor and memory resources from the Pixhawk 4 while eliminating interfaces that are normally unused This allows thePixhawk 4 Mini to be small enough to fit in a 250mm racer drone Pixhawk 4 Mini was designed and developed in collaboration with Holybro and Auterion It is based on the Pixhawk FMUv5 design standard and is optimizedto run PX4 flight control software Specification Flight controller Dimensions 38x55x15 5mm Operating temperature 40 85c Main FMU Processor STM32F765 32 Bit Arm Cortex M7 216MHz 2MB memory 512KB RAM On board sensors Accel Gyro ICM 20689 Accel Gyro BMI055 Magnetometer IST8310 Barometer MS5611Interfaces 8 PWM outputs 4 dedicated PWM Capture inputs on FMU Dedicated R C input for CPPM Dedicated R C input for Spektrum DSM and S Bus with analog PWM RSSI input 3 general purpose serial ports 2 I2C ports 3 SPI buses 1 CANBuses for CAN ESC Analog inputs for voltage current of battery 2 additional analog inputPower System Power Brick Input 4 75 5 5VUSB Power Input 4 75 5 25VServo Rail Input 0 24VMax current sensing 120AGPS ublox Neo M8N GPS GLONASS receiver integrated magnetometer IST8310PM06 power management board PCB Current 120A