Hobart-Relay (24 Vdc Coil 30 Amp) for Hobart Part# 00-87714-042-5

How to install this part nn1. Make sure the power is off before beginning the installation.nn2. Remove the existing relay from its mounting bracket and disconnect all wiring.nn3. Install the new relay in its mounting bracket and connect all wiring according to the manufactureru2019s instructions.nn4. Securely fasten all wiring connections with wire nuts or other approved connectors.nn5. Turn on the power and test the relay for proper operation by activating it with a voltage source (such as a battery). If it does not operate correctly check all connections and make sure they are secure before proceeding further. nn6. Once you have verified that the relay is operating correctly you can reinstall any covers or panels that were removed during installation.;