HiKaRiGuMi 5C Indexing Spin Jigs Drill Milling Lathe Grinding Indexing Head Collet Fixtures

Description: It Is an Indexing Head That Divides the Workpiece Mounted Between the Centers or on the Chucks into Any Angle or Any Equal Part by Using Indexing Rings and Vernier Locating Pins and Indexing Discs and Exchanging Gears. You Can Mount It on Milling Machines Grinding Machines Drilling Machines Etc. to Perform Indexing Work. Key Features: High Portability: Its Moderate Size (9.29*6.06inch) and Weight (11.68lbs) Allows You to Carry It Around for Your Daily Use. Good Stability: Its Flat Bottom Makes It More Stable to Place and Ensures You More Precise Use. Customer Service: We Aim to Provide Quality Products and Services. If You Have Any Problems Please Feel Free to Contact Us. We Will Reply and Solve the Problem for You As Soon As Possible. Indexing Holes Plate: This Indexing Holes Plate Can Quickly Solve the Indexing of Non-integer Numbers of Revolutions Which Makes It Very Quick and Easy to Operate. Vernier Indexing Holes: It Has Ten Vernier Positioning Holes Which Can Make More Accurate Indexing. Screw: the Screw on the Machine Help You Lock Them in Place After Setting Them to Ensure More Accurate and Stable Indexing. Application: It Is Suitable for Indexing Work on Milling Machines Grinding Machines Drilling Machines Etc. Specification: Material of Housing: Cast Iron Material of Mandrel: Steel Module: Pf70/5c Individual Spacing Dividing Accuracy: ±4 Indexing Holes Plate: 36 Vernier Indexing Holes: 10 Size: 23.6*15.4cm/9.29*6.06inch Weight: 5.3kg/11.68lbs Capacity for Standard 5c Collet: 1-30mm/0.04-1.18inch Height of Center:70mm/2.75inch Spindle Cone Radial Runout: 0.010mm/0.0004inch The Radial Center of the Spindle Is Bouncing (25mm/0.984inch from the Spindle End): 0.03mm/0.0012inch The Parallelism of the Center Line of the Spindle to the Bottom Surface: 0.02mm/0.0008inch Package Included: 1* Indexing Head 1* Hex Key 1* English Instruction Manual Notes Please Be Sure to Confirm That the Model Number Is Correct Before Purchasing Don t Make a Mistake Between the Size of the Center Height and the Size of the Chuck. Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3 Cm Error Due to Manual Measurement and Make Sure You Do Not Mind Before Ordering.