Heli-Nation Ta lon F7 F722 Upgrade 8S 5V/2A BEC 20*20mm Flight Controller MPU6000/ FUSION

Description: Item Name: Heli-Nation Ta.lon F7 Upgrade Flight Controller Size: 20*20mm Version: MPU6000/ FUSION (Optional) TA LON F7 MPU6000 1.MCU:STEM32F722RET6 216MHz 1.Pro.ven noise free MPU6000 3.Build in Beta flight OSD 4.Up to 8s(36V) direct battery power 5.Buzzer pads for external buzzer 6.Build in voltage monitoring resistor 7.5V 2A BEC 8.Dedicated LDO for Gy.ro,noise free gyro power 9.Dedicated LDO for OSD, cleaner OSD signal 10.Led strip share 5V with 5V/2A BEC 11.6 UARTS:UART1,UART2,UART3,UART4,UART5,UART6 12.Build in camera control pin with resistor and capacitor 13.5 Full UARTS with RX and TX pins 14.Logical Pin layout for cleanest build possible 15.8 pin 4 In 1 ESC plug 16.Remapable LEDS Pad for additional Motor output 17.TX3,RX3 can be used for 12C for external compass 18.5V,VBAT selectable VTX and CAM power 19.16M Blackbox flash chip 20.None flicker VTX pit mode switch(positive switch) 21.20x20 mounting hole with ture 25mm board dimensions 22.Includes *3 pin connector harness cables for direct pin to Aikon AK32PIN,Spedix GS25A,and Airbot Ori32,8 gromments,M3 to M2 nut adapters, M3X5 standoffs 23.Betaflight target:CLRACINGF7 TA LON F7 FUSION 1.MCU:STEM32F722RET6 216MHz 1.2xICM20602 GYROS 90 degp0068ase 3.Build in Beta flight OSD 4.Up to 8s(36V) direct battery power 5.Buzzer pads for external buzzer 6.Build in voltage monitoring resistor 7.5V 2A BEC 8.Dedicated LDO for Gyro,noise free gyro power 9.Dedicated LDO for OSD, cleaner OSD signal 10.Led strip share 5V with 5V/2A BEC 11.6 UARTS:UART1,UART2,UART3,UART4,UART5,UART6 12.Build in camera control pin with resistor and capacitor 13.5 Full UARTS with RX and TX pins 14.Logical Pin layout for cleanest build possible 15.8 pin 4 In 1 ESC plug 16.Remapable LEDS Pad for additional Motor output 17.TX3,RX3 can be used for 12C for external compass 18.5V,VBAT selectable VTX and CAM power 19.16M Blackbox flash chip 20.None flicker VTX pit mode switch(positive switch) 21.20x20 mounting hole with ture 25mm board dimensions 22.Includes *3 pin connector harness cables for direct pin to Aikon AK32PIN,Spedix GS25A,and Airbot Ori32,8 gromments,M3 to M2 nut adapters, M3X5 standoffs 23.Betaflight target:CLRACINGF7 Packaeg Included: 1 X Heli-Nation Ta lon F7 Upgrade Flight Controller