Heat Set 6Pcs Constant Temperature Hot Air Tool For Working US Plug 110V

Heat Set 6Pcs Constant Temperature Hot Air Tool for Working US Plug 110V Specification: Item Type: Hot Air Working Current: 2.5A Power: 450W Working Environment Temperature: 450 degrees Celsius Package List: 1 x Hot Air 4 x Nozzle 1 x Bracket 1 x User Manual Note: 1. In order to ensure person please unplug the power cord after the machine has finished working. 2. The parts approved or recommended by the original factory must be applied otherwise serious consequences will incur. 3. Machine failures must be repaired by professionals. 4. After the hot air is turned on its temperature may get above 400 degrees Celsius . Do not use it near flammable and explosive gases and objects. The nozzle and the hot air it emits are very hot and can burn the human body. Do not touch the heating pipe or spray the hot air directly on the human body. 5. Please ensure that the hot air is in a safe state before turning on the hot air and the operator must not leave the workplace after the hot air is turned on. 6. When installing the nozzle it cannot be installed when the hot air is turned on. It must be installed after the heating pipe and the nozzle are cooled. 7. Please keep the inlet and outlet air outlet of the machine unblocked and there should be no blockages. 8. After use remember to cool down the body put the welding torch back on the bracket and turn on the machine after it goes to sleep. 9. It should be handled with care and do not vibrate strongly or strike the heating torch. 10. There will be smoke during welding please make proper ventilation facilities. 11. Before shutting down the hot air please lower the temperature and increase the wind speed to lower the temperature of the heating core which can prolong the service life of the hot air . It can be turned off when the temperature reaches 100 degrees Celsius .