Hayafir Suitable for 2106/161/169 brushless electric wrench drive board controller board

Features: *The product is suitable for Dayi 2106/161/169 brushless electric wrenches. It has been tested before selling OK. *18V 21V Brushless Angle Grinder Drive Plate Polishing Machine Dayi *General Control Panel Size 5.2*6.2CM *Brushless sensorless angle grinder drive control board general *Control board drive voltage: 18V (5 strings of lithium batteries fully charged 21V) power 300W. *The battery pack marked with 48V 68V 88V 98V 128VF or TV can be used and its voltage is actually 18V (5 series 2 parallel 10 cells or 5 series 3 parallel 15 lithium batteries fully charged 21V) . *Before testing the machine you must first connect the wire---fix the motor---install the case---tighten the screw---make sure that the square shaft of the head can be easily rotated without jamming---connect the power supply--- Press down the speed control switch so that there is no gap in the shell! Otherwise there may be a buzzing alarm! *To prevent damage to the motherboard please follow the requirements. Package Contents: 1*Control board Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.