Handheld 125KHz RFID Duplicator Key Copier Reader Writer ID Card Programmer, Rfid writer, 501 Original

Description: 125 KHz hand-held replicator is a device used to produce and master card sample number, which adopts miniature hand-held external light, conforms to ergonomics and is easy to carry; Adopts Silicon international advanced chip, all the work is completed by this chip, so that the product integration is higher, more stable and reliable; Adopts excellent program algorithm and circuit design, reduces product power consumption and prolongs battery life; The design of a read button and a write button makes the operation easier. It can copy ID (EM4100) card and AWID card, which can penetrate the firewall.Features:The keychain can read and write up to 2.5cm, and the card can reach 6cm.ID card, AWID card can be copied.Support for writing 75577, EM4305, CET5200 and 75577, EM4305 compatible cards, 8265, 8268.Specifications:Frequency: 125KHzBattery: 2 X AAA batteries, can be copied 20,000 times (Not included)Model: ID Card, RFID Copier Writer, ID Card + RFID Copier WriterColor: BlueUsage method:1. Start device 1. Push up the switch on the right side of the device, the red light is always on, the green light and the yellow light flashes at the same time, the buzzer ticks 2 or 3 times, indicating that the start is successful. Otherwise, the buzzer will start again. 2. When the device starts up, no card will be read at this time, and then press the device write card button, the card can be written as a full 0 ID (EM4100) card. After writing, the buzzer ticks, the green light turns on 3, and then press down. The yellow light is on, indicating that the equipment is working.2. Duplicate the D (EM4100) card 1. Push the switch on the right side of the device upward. The device does make two or three sounds. The green light and yellow light flashes simultaneously to indicate the successful start-up. 2. Put the master card at the antenna position on the left side of the device first, press the card reading button, and the device does make two sounds to indicate the success of card reading. 3. Change a new card, press the card carefully, and the device ticks to indicate the success of card writing. At the same time, the green light is on and the copy is successful.3. Copy AWID card 1. Push the switch on the right side of the device up, the device ticks three times, the green light and the yellow light flash at the same time to indicate that the start-up is successful; 2. Put the mother card in the antenna position on the left side of the device, press the card reading button, and the device 3 times indicates that the card reading is successful. At the same time, the green light lights on 3, change a T5577 card, press the card carefully, and the device 3 times indicates that the card writing is successful, and the green light is on and the copy is successful.Notes:1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!2. Please allow 1-3cm measuring deviation due to manual measurement.Package Content:3 X ID Cards1 X RFID Copier Writer1 X English Instruction