HW-HB100 10.525GHZ Double-plate Microwave Sensor Detector Module for Smart Home

Description HW HB100 is a two board laminated microwave induction module According to the principle of Doppler effect the antenna is used to transmit and receive high frequency electromagnetic waves Then when a small movement change of the back wave is detected the microprocessor is triggered to work and the final output is useful The control level H 1 L 0 or control state It is suitable for the secondary development of intelligent electrical appliances security products lighting products and other electronic fields This product can be widely used in security monitoring intelligent controlSystem lighting equipment uses in garages corridors roads etc Specification Product model HW HB100Working voltage 6 24V Built in 7550 need constant power supply minimum drive 6V300mA ± 100mV Static power consumption 35mAOutput mode 3 3 0V 3 3V with induction 0V without induction the output voltage can be adjusted to 5V at most Transmitting frequency 10 525GHZInduction distance 10m 5 30m adjustableDelay time 2S 2 120S adjustableWorking temperature 20℃ 80℃Dimensions 47 5 40 9mmTrigger mode Repeatable triggerRepeat trigger After the first trigger when the sensing area is triggered again the module delay time will be superimposed again when the first trigger time has not stopped For example the module delay is 10S the induction signal is received again within 10S and then superimposed for 10S the uninterrupted trigger within 10S there will always