HOOZHU U10 Underwater 80m U2 900LM 3Modes Easy Operation Diving Light Portable Waterproof EDC Flashlight Suit with 18650 & Charger

Specifications: Product name: HOOZHU U10 Underwater 80m XM- L U2 900LMDiving Light Portable EDC Flashlight Suit Brand: HOOZHU Model: U10 Type: Diving Light Waterproof: Underwater 80 meters Emitter Type: XM- L U2 Light Color: Cool White (CW) Color Temperature: 6500K Max Output: 900 Lumens Angle of Light Beam: 15 Mode: High, Low, SOS Runtime: 2.3 hrs, 3.8 hrs, 3.0 hrs Battery Configurations: 1x 18650 Li-ion Battery (Included) Switch Type: Clicky Switch Location: Side of the flashlight Material: Durable Aircraft-grade Aluminum Surface Treatment: Premium Hard-anodizing Impact Resistant: 1.5 Meters Lens: 4.5mm double scratch high transparent PC Carrying Strap: Strap Color: Black, Blue, Red Weight: 65g without battery Size: 124mmx 28.8mm(Lengthx Diameter) Operation: 1. Press On/Off to cycle through high,low,strobe, 2. And the lights will turn off after press and hold switch for 2 seconds. Package included: 1 x HOOZHU U10 Underwater 80m XM- L U2 900LMDiving Light Portable EDC Flashlight Suit 1 x Storage Box 1 x 18650 battery 1 x 18650 battery charger 1 x Charger plug adapter suitable for your country socket size 2 x Waterproof O-rings 1 x Lanyard NOTES: 1.The Diving Light with special fixture.It would be damaged if disassembled at your own discretion. 2.Pl inspect the O-rings carefully every time you finished diving and change the broken O-rings when necessary. 3.After every diving,pl clean the flashlight body with fresh water,and store it properly after full dried. BATTERY INSTALLATION 1.Remove the tail by turning counter-clockwise. 2.Remove used batteries and replace with fresh batteries as shown by the polarity stickers. 3.Mount the tail by turning clockwise.DO NOT ACTIVATE IT YET. BATTERY CHARGING 1. Plug the charger in the wall power socket, the indicator light is green in the free-load status. 2. Put the battery in the slot of the charger. 3. The indicator light is red if the batter is not fully charged; It will turn green after fully charged. 4.Take out the fully charged battery and use them in the diving light. SCUBA DIVING APPLICATION Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces. KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE. CAUTION If the light is not to be used for sometime,remove the batteries to prevent possible leakage or corrosion.Pl remove the batteries during transportation to prevent it from incorrect operation