HGLRC C1 2.4GHz 8CH Built-in ELRS Entry-Level Remote Control for FPV DCL Liftoff DRL RC Racer Drone

HGLRC C1 2 4GHz 8CH Built in ELRS Entry Level Remote Control for FPV DCL Liftoff DRL RC Racer DroneDescription HGLRC C1 Remote ControlBuilt in ELRS ELRS 2 4GHZ Built in ELRS refresh rate 250Hz Remote control sensor type potentiometer sensor Antenna built in ipex1 generation copper tube antenna Working voltage 6 8 4v DC Remote control distance greater than 500m Output interface TX module NANO bin crsf protocol TYPE C only charging and firmware flashing 3 5MM analog trainer port Battery 18650 flat head battery 2 need to be installed by yourself Charging TYPE C charging current 1 2A The charging time is about 3 4 hours Remote control channel 8 channels Bluetooth Bluetooth 4 2 ELRS firmware upgrade method WIFl or TYPE C cable brush ELRS firmware version ELRS 3 0 ELRS firmware name DIY devices 2 4 GHz DIY ESP32 E28 2 4GHz TX Weight 195g excluding battery Size 160mmx130mmx50mm excluding remote rod Wireless DongleBuilt in ELRS Maximum supported frequency 250hz Receiving distance more than 200m Binding method Quickly power on and off three times to enter binding mode Interface USB TYPE C USB TYPE A double plug Working voltage 5v ELRS firmware upgrade method WIFI or USB plug ELRS firmware version ELRS 3 0 ELRS Firmware Name HGLRC 2 4 GHz HGLRC Herme 2 4GHz RX External receiver support protocol only supports CRSF protocol Weight 9 5g Size 74mmx21mm 12 5mmFeatures 1 Built in 500mw radio frequency module which can realize stable signal transmission