HECHEN CA10A High Flow 3.0L Automatic Small Intelligent Single Head Liquid Induction Multifunctional Quantitative Filling Machine(EU Plug)

1. Input voltage: AC 110-220V 50/60Hz2. Output voltage: DC12V3. Ambient temperature: 10 - 40 degrees Celsius4. Medium temperature: 3.0L model: 5 - 50 degrees Celsius; 1.5L model: 5 - 100 degrees Celsius5. Minimum flow rate: 3.0L model: 10ml; 1.5L model: 5ml6. Maximum flow rate: 3.0L model: 3000ml/min; 1.5L model: 1500ml/min7. 1s flow rate: 3.0L model: 50ml; 1.5L model: 25ml8. Water pump flow rate: adjustable9. Speed ​​range: 01-99 PWM digital display speed regulation10. Filling capacity setting range: 1-999911. Counter: Supported, counting range 1-999912. Pump head material: 3.0L: PBT plastic; 1.5L: PC plastic13. Corrosion resistance: 3.0L: supports weak corrosion; 1.5L: not corrosion resistant14. Scope of application: liquids with good fluidity, no particles15. Power-off memory: supported16. Adjustable range of filling bracket: 0-200mm adjustable17. Check valve: yes18. Suitable for bottle mouth inner diameter: greater than 12mm19. Filling capacity range: 3.0L: 10-3000ml1.5L: 5-1500ml (note: the specific filling capacity depends on the bottle shape and specifications)20. Conveyor belt interface: supports 12V conveyor belt expansion to realize automatic conveyor belt filling linkage21. Sensor interface: with foot switch, and supports DC12V NPN three-wire sensor22. Six working modes:- Inching: press and hold to release water, release to stop- Manual: press once to fill once- Automatic: automatic cycle intermittent filling- Foot switch: step once to fill once- Induction: fill once when the bottle is sensed- Conveyor belt: automatic conveyor belt induction filling23. 3L large flow diaphragm pump: suitable for non-corrosive, non-particle-free liquids at room temperature with good fluidity, the recommended filling range is 10-100ml, such as beverages, liquor, vinegar, soy sauce, fruit juice, etc.24. 1.5L heat-resistant diaphragm pump: suitable for non-corrosive, non-particle-free liquids with good fluidity within 100 degrees Celsius, the recommended filling range is 5-500ml, such as soy milk, milk, goat milk, plum juice, etc.25. Size: about 18 x 13 x 10cmFeatures:1. Efficient: intelligent induction, making filling operations handy and freeing your feet2. Accurate: microcomputer control system, just enter the capacity directly3. Safety: the host is powered by low-voltage DC, which is more secure4. Convenient: small size, easy to store, and saves space5. Durable: the body is made of stainless steel, and the inlet and outlet pipes can be replaced by yourself6. Intelligence: humanized design, multiple filling modes, suitable for different working scenesFilling machine suitable requirements:1. Applicable liquid must be pure liquid, free of impurities, and non-viscous2. Pastes, honey, diesel, engine oil, gasoline, and kerosene are not applicablePacking list:- Filling host x 1- Power supply x 1- Power cord x 1- Foot switch x 1- Instruction manual x 1- T-head x 1- Screws x 2- Cross clamp x 1- Filling head fixing clamp x 1- 20cm steel pipe x 2- 1.5m water inlet pipe x 1- 0.8m water outlet pipe x 1- 9mm filling head x 1- Filter x 1- Installation tool x 2