GPD WIN 8GB Restore BIOS System Disk

The GPD WIN system disk is used to reinstall the system, which is very easy to operate. Please watch the following steps.
Instructions
Make sure the battery is more than 50% (As the charge current is only 500mA in the WINPE Mode, you should make sure the battery is enough to install the system).
Format the U disk into NTFS, change U disk name to "WINPE".
Copy the Extracted file of WINPE folder to the NTFS U disk .
Insert U disk to GPD WIN.
Normal shutdown or forced shutdown by pressing the button for 5 seconds, press both DEL button and Power button until following interface appear.
Choose UEFL: XXXX, Partition 1 by direction key.
Cost about 20 minutes to finish the while installation, and then GPD will auto reboot.
After rebooting, you will enter the Factory Mode.
Close this window ,double click to start CleanupTestTool.
GPD will eliminate OOBE file and Power off.
You should take care to select your language, the GPD react slowly, so you need to try several times to choose your language.
Specifications
MaterialMetal
Storage8GB
Package Weight30g
Package Size8 x 4 x 2 cm
Package Contents1 x System Disk