Fyydes DC 12V Solar Water Copper Wire Motor High Lift Stainless Steel Submersible Well 180W High Lift Solar

Feature: 1. EXCELLENT MATERIAL: Using stainless steel body pure copper wire motor and screw rod is SS and rubber materials safe and environmentally friendly. 2. GOOD PERFORMANCE: The solar water is simple in structure with stable performance low energy consumption and large easy to use and maintain. 3. EASY TO CONNECT: Barb shaped water outlet is convenient pipeline connection with good insulation and the is corrosion and wear resistant. 4. HIGH EFFICIENCY: The solar has a maximum of 3 m³/h a maximum lift of 10 meters and a motor speed of 3500r/min which is efficient and durable. 5. WIDE APPLICATIONS: This DC deep well can be used in farms irrigation gardens pools boats aquaculture washing workshops mining drainage etc. Specification: Item Type: Solar Water Model: 2SYDC12V/S3-10-180 Rated Power: 180W Maximum : 3 m³/h Maximum Lift: Approx. 10 meter / 32.8ft Power Supply Voltage: DC 12V Outlet Diameter: Approx. 25mm / 1in Motor Speed: 3500r/min Material: Stainless Steel Power Supply: Solar panels and batteries can be used as the power supply to drive the Package List: 1 x DC Solar 3 x Pipe Joints 3 x Rubber Gaskets 1 x User Manual Note: 1. No idling is allowed and the idling of the motor should not exceed 1 motor otherwise the oil sealing may be damaged 2. Do not pull the cable when putting in or pulling out the in water 3. If there are debris such as sediment in the water source please put the in a bamboo basket or other anti pollution equipment to prevent clogging 4. The lift is too low please check whether the connecting line is too long or smaller than the cable; open the bottom mesh to check whether the impeller is blocked; or the power is insufficient 5. It is forbidden to use 220V household power supply How to use: Fully immerse the pump in water when using 1. Check whether the power supply voltage matches the pump 2. Check whether the red cable is connected to the positive (+) and the other wire should be connected to the negative (‑) 3. Before using the pump please put the pump into the water first and then power on 4. After using or not using the pump the battery should not be immersed in water for a long time. After use please keep the pump away from water and dry it in a ventilated place.