For Harman 3-20-677200 Pellet Fireplace Ignition Rod Replacement 17 Teeth

Features: *Easy to install and prefect replacement for parts. Specifications: Length: 3.1 Voltage: 120V Width: 3/8 Rod With 1 Fins Connectors: Male Spades Replaces part numbers: 1-10-06620 3-20-06783 3-20-677200. Troubleshooting Igniters: Igniter failure can be verified on three ways. 1. start your stove and visually look for the orange glow; 2. physically feel around in the burn pot after the stove has been on for a few minutes to feel for heat being generated. 3. Use a DMM (Digital Multi-Meter). Gain access to the igniter and remove it from the stove or insert. With the igniter removed from the stove you will need to look over the part to find the rated watts. If your Ohms reading is within 10% more or less than the rating (46Ω +/-10%) it s good. If the igniter has a contained short or a short within itself and not grounding out your Ohms reading will be very low...usually in the single digits. Generally you cannot have a faulty igniter with too high of a resistance reading unless an igniter is installed that is way out of spec. It s usually good to look at the part itself for the watts rating. Package Contents: 1 x Igniters Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data.