For Cubot Note 30 Original LCD Screen Digitizer Full Assembly with Frame

Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly with frame replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installed