Focus Foodservice FGSTK063CH 63 in. Staked post - chromate

2 Shelf consists of cage plus 2 ea Chromate shelves staked Chromate posts aluminum split sleeves and an aluminum truck dolly w/5 in. polyurethane wheels. 3 Shelf consists of cage plus 3 ea Chromate shelves staked Chromate posts aluminum split sleeves and an aluminum truck dolly w/5 in polyurethane wheels. 4 Shelf consists of cage Chromate shelves mobile Chromate posts and 1 set of 5 in. casters (2 swivel 2 swivel w/brake & 4 bumpers).Features Finesh - Chromate Pack of 4 Size - 63 in.Assembly Instructions Step 1 - Unpack carton identify and confirm quality of components. Step 2 - Before assembly of shelving unit to Truck Dolly unscrew the leveling feet on the posts. Step 3 - Attach the posts to Truck Dolly frame using leveling feet and washers and tighten down. Step 4 - Assemble shelving unit with at least three shelves. The top shelf should be mounted at the top groove of the post. The bottom shelf on a 74 in. post in order to be inside the security enclosure must be 13 in. above the dolly. If using a 63 in. post and the bottom shelf should be located on the second groove from the bottom. Third shelf should be placed in the middle of the posts. Step 5 - Remove the plastic top caps from all four posts. Step 6 - Install the steel inserts into the holes where the plastic top caps were. Make sure steel insert is set all the way into the top of post. You may use a rubber mallet to secure the inserts. Step 7 - Assemble the side panels with the loops on the bottom facing inward. Tilt the panel so the loops lock around the posts on both ends and then slide down so the loops are on the posts. Align holes in guide plates with steel insert at the top of the posts. Partially screw in bolt through guide plate into top of the front post. This will keep side panel in place during the assembly process. Repeat with other panel. Step 8 - Assemble left side back panel first. Place the wires that are facing downward into the loops on each side panel. Step 9 - Repeat the same for the right side back panel as in Step 8. Step 10 - Secure back panels with back panel assembly hardware. Install as shown. For greater security assemble uppermost plates through top shelf. Place additional securing clip at the bottom of the back panels. (Push down so that the 2 prongs of the clip wrap over the truss of the bottom shelf.) Step 11 - Install the left front door assembly by placing the side wires into the loops of the side panels. Step 12 - Repeat with right front door assembly as in Step 11. Step 13 - Line up holes of the guide plates in the top of the panels over the steel inserts in the top of the posts and screw in bolts into posts.Tighten down bolts in front posts. - SKU: FCFDSV1366