Fireplace Bellow Manual Wooden Fireplace Blower Fire Pit Tools Housewarming Gift for Outdoor Barbecue Cookout

Features: 1. Made of high quality material brand new and durable in use. 2. Qualified butane gas should be used poor quality gas may damage lighters or reduce its service life. 3. Suitable for restaurant household picnic hiking camping and other outdoor activities. 4. Designed with compact size and light weight for portability. Widely used to ignite stove cigarette candle or used for outdoor camping picnic BBQ etc. 5. Ergonomic design for comfortable holding in the hand. 6. It can be fixed on butane can which can be replaced cycle use is environmentally-friendly. Specification: Condition: 100% Brand New Item Type: Gas Lighter Material: Metal Color: Shown as Picture Length: Approx. 14.5cm / 5.7in Width: Approx. 6cm / 2.4in Height: Approx. 4cm / 1.6in Package List: 1 * BBQ Lighter (Oil Not Included) 1 * User Manual How to operate correctly? 1. Before inflating use a small tool to hold the inflatable core completely discharge the residual gas inside and eliminate the pressure in the gas can of the lighter. 2. Press the outlet of the aerated gas cylinder vertically downwards press each time for about 5 seconds two or three times. 3. Please wait for about 5 minutes after the inflation is completed. If there is still no fire after 5 minutes please adjust the adjustment valve to a larger value. (note + - direction) Detailed inflation introduction instructions: Refueling method: 1. When refilling there must be no visible flame around to ensure safety. Do not refill while smoking. 2. Qualified butane gas should be used. Inferior gas may damage the lighter or reduce the service life. 3. When the normal model is refilled please headstand the lighter align the gas outlet of the gas bottle and cover the air inlet of the lighter and press it several times each time for about 2 seconds; If the gas cannot be filled it may be that extra air is left in the steam box. At this point you can deflate use a small screwdriver to align the air inlet and deflate 1-2 times then perform the air filling operation. 4. When refilling first loosen the air inlet screw cover with a flat-blade screwdriver and other tools then follow the above steps. After the filling is completed the screw cap can be flattened not too tight; otherwise the cover will not be dense and the cover sound will not be crisp and the gas will escape. 5. When the gasoline engine is refueling the head cover should be opened the movement should be pulled out and reversed and the outer sponge should be opened to add a proper amount of gasoline. After the gasoline penetrates into the inner layer of cotton the outer sponge is covered and then inserted into the casing. 6. After all kinds of lighters are refueled wait at least 1 minute to adjust the temperature of the newly charged gas to room temperature and then ignite after the residual gas attached to the lighter is completely evaporated. If the ignition operation is performed immediately at this time the residual gas on the outside of the lighter may be burned posing an unnecessary danger. After refilling the gas if the flame height is too high or too low when used it is a normal phenomenon and the flame height can be moderately adjusted.