Feiyu Tech WG2X 3-Axis Wearable Gimbal Camera Stabilizer Compatible With GoPro HERO 7/6/5/4/ Session

Features Lightweight Design Lighter gimbal will lighten the load, a bettery experience for you. Special Designs Unlimited rotated angles in tilting and panning motor helps take wide footage; splashproof function let you make a smooth clip in a foggy day; anti-slip design on the button and side will make you hold it steadily. Smart Switch Session adapter with long screws,allows you to switch between Hero and Session series easily. More Choices The optional RX0 adapter gives you more choices. Excellent Protection Soft protection pad on the panning motor will well protect the camera; it will automatically enter standby mode if turned on without camera to protect the motor. Smart Indication Power on and off with a reminder of the beep can be heard clearly outdoors. Intelligent Impression Intelligent initialization automatically checks motionless desk and finishes it with a reminder of the beep; it intelligently follows pre-set route in auto-rotation mode, fit for motion time-lapse or automatic shooting. Compatibilities Suitable for all the accessories of Gopro base adapter with 1/4 inch T-head connector, which can be mounting on helmet, bicycle, selfile pole,etc, it is compatible with extension bar and tri-pod with 1/4 inch thread hole at the button and side. Others Quick upgrade ,set up the parameter ,reset and virtual remote control with APP.; several working mode make most of the videos easily to be done. Specification General Brand: Feiyu Tech Item Name: WG2X Battery type: Build-in lithium battery, 1500mAh, 3.7V, Charging it via USB port is supported. (Note: The function of splashproof will be affected while charging.) Battery life (working) Time: 2.5h(wifi function on) Charging Time: About 2 hours (using a 5V/2A charger) Splash-proof Grade: Only splash-proof. It is banned from using under water, and being exposed to salt water. How To Balance It With the movement of the rolling arm to find the perfect balance status for different cameras. Power On And Off POWER ON: Long-press the function button until the green light is on. (Release it until the beep is on). POWER OFF: Long-press the function button until the light is solid red. (Release it until the beep is on). Working Mode Operate with function button Function Button 1.Single tap:Switch between panning mode(default mode) and lock mode 2.Double tap:Panning and tilting mode, enter panning mode by single-tapping in this mode. 3.Triple tap:The lens can be rotated 180in horizontal, working together with the function of manual lock, you can take a selfie or video with special angle. This function will not work in lock mode. 4.Quadruple tap: Auto-rotation Mode, perfectly fit for time-lapse. You can set up the starting and ending point, the route in this mode.After Completely set up,the gimbal will be automatically rotated following pre-set route in constant speed ,which is set up in App before.(Check more details in the manual of WG2X) 5.Fifth tap:Initialization. In this mode you can adjust the tilting gimbal. (Note:After fifth tap,the gimbal will automatically check whether you put the gimbal on stationary desk,the indicator will be solid blue;it will start Initialization once successfully be put on stationary desk and the indicator will flashes blue 3 times,click the function button once to wake the WG2X up. If not, it will wait until the placement is done.) Mode Button 1.Long press:Turn on/turn off the wifi 2.Single tap:switch the shooting mode of camera after connecting to the camera 3.Triple tap: The lens can be rotated 180in horizontal, working together with the function of manual lock, you can take a selfie or video with special angle. Shutter Button Single tap:Start/stop shooting after connecting to the camera Manual Lock Rotate the tilting motor to any angle as you need, and it will stay there by holding for half a second.(Note:you can't use this function in panning and tilting mode) Mounting Way Inverted mounted(The camera in left or right side will be both fine) Vertical mounted(The camera in left or right side will be both fine) Forward mounted(The camera in left or right side will be both fine) Connect To Cameras 1. Turn on WiFi of action camera 2. Connect with Feiyu ON App, click the icon "Connect camera" at the top of virtual joystick 3. Select camera model (GoPro or RX0) and find the camera in the WIFI list 4. Input WIFI password, and wait for the connection to be done. 5. Use the mode button or shutter button to control the camera. The Angles Of Rotation In 3-Axis Tilting Angle: 360(unlimited) Rolling Angle: 70(keep horizontal) Panning Angle: 360(unlimited) Optional Accessories Extension bar Tri-pod RX0 adapter General accessories of Gopro. Extensible Port 1/4inch thread hole at the bottom. Compatible Cameras WG2X is compatible with GoPro HERO7/6/5/4/YI 4K / SJCAM/AEE,etc, and the cameras with similar size as Gopro. The maximum payload is 135 gram. It can compatible with HERO Session series by session mounting plate. It can also compatible with Sony RX0 with additional RX0 adapter. Package Contents 1 X Feiyu Tech WG2X Gimbal 1 X USB Cable 1 X Session Mounting Plate 2 X Short Screw 2 X long Screw 1 X 1/4 inch T-head Connector 2 X EPP Bag 1 X Manual Downloads : http://www.feiyu-tech.com/wg2x/down.html