FLYWOO F405 F4 Flight Controller OSD 5V 9V BEC ICM20689 & Power Hub-LED Rev1 PDB & WS2812 8 Bits LED

FLYWOO F405 F4 Flight Controller Built In OSD 5V 9V BEC ICM20689 & Power Hub-LED Rev1 PDB 3-8S & 4 PCS WS2812 8 Bits LED Board Description: F405 Flight Controller: Size: 36*40mm Hole: 30.5*30.5 3mm Weight: 8.3g MCU: STM32F405RGT6 Max frequency: 32K GYRO: ICM20689 BARO: BMP280 FLASH: 16M BEC: 5V 1.5A / 9V 1.5A Input voltage: 3-8S Firmware: FLYWOOF405 Installs way: FPC connector & 3M absorbing sponge Dual shock absorption device (3M sponge & absorbing screws) Support camera menu settings Max voltage 42V input 5 functional UARTS (UART1,3,4,5,6) Max 8 motor output Support SBUS, iBus, Spektrum, Crossfire receiver FLYWOO Power Hub-LED Rev1 PDB: Size: 44.7*47.8mm Hole: 30.5*30.5mm, 3mm Weight: 10g BEC: 5V 2A/9V 2A Input voltage: 3-8S Max Current: MAX 200A+ PCB: 6 layer-4oz Max voltage 50V input Build in current sensor Build in 4*WS2812 LED & Pads WS2812 8 Bits LED Board: Weight: 1.82g Voltage: 5V These LEDs can be programmed via Betaflight and Cleanflight. They require 5V and will not work on 12V. These LEDs are not as bright as the 12V LEDs, but they can be programmed for low voltage, flight modes and patterns. FC Addressable LED: Full Colors Range Package included: 1 x FLYWOO F405 flight controller 1 x FLYWOO Power Hub-LED Rev1 1 x FPC connector 1 x 3M absorbing sponge 1 x 8PIN SH1.0 connector 4 x Absorbing screw 4 x WS2812 8 bits LED board