Ewelink DC 12V 24V APP Wireless WiFi Remote Control Switch Single-Channel wireless Access Control Controller

Product parameters Working voltage DC12 24V Switch load each switch load is less than 1000W Output mode relay switch signal output Working mode Jog self locking interlock Standby power consumption 0 1W Use environment 30 75℃ less than 95 relative temperature Product size 56 4mm x 40 2mm x 20mm Service life 100 000 operations Instructions APP account registration Android system Open the App and enter the login interface First register the account After the registration is successful log in then enter the client interface I0S system You need to enter the WIFI setting first and just follow the software prompts Add device operation method 1 Press and hold the ON OFF button on the switch panel for 5 seconds and the green indicator light will flash and click at the bottom of the software to start searching 2 Select the name of the WIFI you want to access and enter the password note that the password must be remembered otherwise the network will not be automatically connected after power on 3 When the status indicator is steady green it means the configuration is successful Remote control pairing method Jog mode Press the remote control A button to turn on the relay and release the remote control A button to turn off the relay Press the control panel pairing button once and the LED indicator flashes once After the LED indicator lights up press the remote control button that needs to be paired and the control panel LED indicator flashes 3 t