Electronic Handwheel 100B-L High-Quality 65mm Electronic Handwheel 100B-L For CNC Machine Tools

Electronic Handwheel 100B-L High-Quality 65mm Electronic Handwheel 100B-L for CNC Machine Tools Specification: Condition: 100% brand newItem type: Electronic HandwheelMaterial: plasticColor: As picture shownHandwheel dameter: Approx. 65mm/2.6inWeight: Approx. 137g Encoder Power supply voltage: DC5?10% Pulse number: 100PPR (VH) output voltage (maximum): Greater than or equal to 3.8V (VL) output voltage (minimum): Less than or equal to 0.3V Output current: 80mA Model format: A.B.A-.B- Output resistance: DIFF speed: 5KHz Current consumption :50mA Starting torques (maximum): 150g Axial volume (minimum): R 2kg?10% Rotation life (minimum) :1KKR Operation temperature: 0 degrees Celsius /+50 degrees Celsius Storage temperature :-10 degrees Celsius /+70 degrees Celsius Operation humidity: 35-80% Vibration resistance: 0.5G Heavy strike resistance: 2G Wiring table Output Signal: A B V0 V+ A- B- Terminal-Line Driver A: 1 2 3 4 5 6 YP600-100B-1L represents a large handwheel with a diameter of 65mm the output is 100 pulses the working voltage is 5V and the output mode is long-line output. This product is suitable for CNC machine tools two orthogonal output signals (A B) 100 pulses The output mode is long-line drive. Package List: 1 x Electronic Handwheel Note: 1. The encoder is a instrument. It is forbidden to knock drop crash etc. during installation. Improper installation or use will affect the performance and service life of the encoder. 2. Pay attention to the shaft load of the encoder during installation and must not exceed the limit load. 3. Be careful not to exceed the limit speed of the encoder during use. If the speed exceeds the limit the electrical signal of the encoder may be lost. 4. The wiring must be correct. If the wiring is wrong the internal circuit of the encoder will be damaged. Insulate the unused cables before the first start. 5. The maximum response frequency is limited by the maximum speed.