Electro-Harmonix Super Pulsar Stereo Tap Tremolo Pedal

A truly super tremolo with powerful controls and signal routing!

Sculpt the tremolo's shape with adjustable sine, triangle and pulse waveforms while tap tempo and tap divide ensure synchronicity. Create your own rhythmic patterns and store them. Save and recall up to eight customized preset programs. Conjure moving tremolos on-the-fly with EXP control over Rate, Depth, Shape, Phase or Volume. Deluxe I/O lets you choose stereo in/out, mono in/stereo out, stereo in/mono out or mono in/mono out operation.

Tap/Clk In JackThis jack accepts up to 3 external footswitches allowing you to set the TAP time and control up to 2 other functions. Additionally, you can set the Super Pulsar to accept clock pulses on the Tip conductor of this jack, instead of switches, so that an external clock sets the Tap time. We recommend powering down Super Pulsar when connecting or disconnecting your external switches to the TAP/CLK IN jack.

Volume KnobSets the overall output level of the Super Pulsar.

RT. Phase KnobTurns the Super Pulsar's stereo tremolo into a panning effect.

Wave KnobIn the counter-clockwise half of this knob's rotation it acts like a switch choosing between the modulation waveforms: Sine, Triangle or Pulse. When you turn WAVE into the clockwise half of its rotation, from 12 o'clock to maximum, the modulation waveform switches to RHYTHM while simultaneously adjusting the pulse length of each beat in the Rhythms.

Shape KnobWhile the WAVE knob is set to Sine, Triangle or Pulse waves, the SHAPE knob continuously varies each of these waveforms' shapes. When WAVE is set to RHYTHM, the SHAPE knob acts like a switch as you rotate it.

Depth KnobAdjusts the amount of effect.

Rate KnobAdjusts the speed of the tremolo or pan effect.

Exp JackConnect an expression pedal with a TRS plug to this jack to control the following parameters with your foot: RATE, DEPTH, SHAPE, PHASE and VOLUME.

Mono/Left Output JackThis is the main audio output.

Right Output JackThis is the secondary audio . When using Super Pulsar in a stereo-setup, connect your right channel to this output.

Wave Invert Button and LEDThis button enables or disables the WAVE INVERT function.

Tap Divide Button and LEDsThe TAP DIVIDE button allows you to divide down your TAP time to create faster modulation rates in relation to what you tapped.

Exp Mode Button and LEDSThe EXP. MODE button chooses the destination parameter for an external expression pedal or control-voltage to modulate. The lit LED indicates the selected mode.

Xrate Button and LEDThis pushbutton cycles through 3 range choices for the RATE knob, one LED indicates the current selection: Slow: xRATE LED off, Medium: xRATE LED dimly lit, Fast: xRATE LED brightly lit.

Right Input JackThis is the secondary audio input.

Mono/Left Input JackThis is the main audio input.

Tap Footswitch & Beat LEDUse the TAP footswitch to tap in your modulation rate.

Mode FootswitchThe MODE footswitch is a utility button that may be reassigned by the musician. It has 2 modes of operation: Normal mode and Preset mode.

Bypass Footswitch and Status LEDToggle between effect mode and true bypass mode. When the Status LED is lit, Super Pulsar is in effect mode.