Electric Drill AC110-240V Electric Screwdriver Punch Tool Rechargeable Handheld Electric Drill For Industrial Supplies US Plug

Electric Drill AC110-240V Electric Screwdriver Punch Tool Rechargeable Handheld Electric Drill for Industrial Supplies US Plug Specification: Item Type: Electric Drill Model: TB089 No-Load Speed: 2000rpm Power Supply: Rechargeable-lithium battery technology Battery: Rechargeable lithium battery 1500mAh Power Supply Voltage: AC110-240V Working Voltage: 21V Use Time: About 150 minutes Rated Output Power: 200W Rated Torsion: 38Nm Electric Drill Structure: grip type Speed regulation: Stepless speed regulation Rotation Direction: Support CW and CCW Drill Bit Clamping Method: Drill chuck Handle Structure: Rear straight handle Application: Screw drilling unloading nuts drilling wood Chuck Diameter: Approx. 12mm / 0.5in Maximum Drill Diameter: Approx. 10mm / 0.4in Rated Speed: 1500rpm Wood Drilling: Approx. 20mm / 0.8in Aluminum Drilling: Approx. 20mm / 0.8in Steel Drilling: Approx. 12mm / 0.5in Accessories: One battery one charging plastic box Package List: 1 x Electric Drill 1 x Battery Box 1 x Adapter 1 x User Manual Note: 1. When operating the operator should pay attention to whether the accessories are intact whether the insulated cable is damaged whether there is aging etc. After the inspection plug in the power source before proceeding. 2. During cutting and grinding operations there should be no people and explosives within one meter around and do not work in the direction of people to prevent casualties. 3. When the grinding wheel is used up and needs to be replaced the power supply must be cut off to replace it in case the switch is pressed accidentally causing unnecessary personnel accidents. 4. When working with dangerous and flammable materials more than two fire extinguishers must be equipped to prevent problems. Achieve the principle of first and production second. 5. If you use it after a period of 30 minutes you should stop resting for more than 20 minutes and work after it cools down. To prevent the temperature from being too high during ‑term use which is easy to damage and cause industrial accidents. 6. When in use we must use it in accordance with the use specifications and instructions and perform regular inspections maintenance and ensure that the work is in condition to reduce the occurrence of accidents.