Ecale Wireless Universal Garage Door Remote Cloning/Duplicator Remote Control Remote Relay Switch 433MHz Remote Control with Four Channel for Old Key Fob Replacement

Specification: Condition: Brand New Material: ABS Working voltage: DC12V Working current: ≤12mA Working frequency: 270MHz to 434MHZ Transmitting power: ≥10mW Launch distance: 100 meters (open space) Frequency deviation: ±0.2MHz Transmission rate: 50--60KHZ Package Size: Approx 6x4x1.5cm 1.Chips could be copied: 2260(all manufacturers);2262(All manufacturers);PT2264 5326(All manufacturers);SC5262 HT600 HT680 HT6207 HT6010 HT6012 HT6014 SMC918series 527(All manufacturers);1527(All manufacturers);2240(All manufacturers);HCS101 HCS200HCS201(part code) HCS300HCS301(part code) part single chip microcomputer.......... 2.Code cleaning method: Press the unlock button and lock button at the same time(some shells are the up button and down button) after the LED indicator light flashes three times loosen any one of the buttons while the other is kept pressing then push the released button three times the LED indicator will enter into the fast flashing status. At this time all the memory data is cleared the cleaned remote control will not have lighting LED indicator no matter which button you press. 3. Copy method: One hand keeps the original remote controller while another keeps the copy remote control the two remote controls should be placed as closely as possible (the ideal situation is to put the two remote controls on the desktop side by side with zero distance) respectively press down the copy button when the LED indicator light flashes quickly after three flashes this copy is successful other key operating methods are the same. Some remote control has a smaller transmitting power so the original remote control should be placed back to the copy remote control to be operated. For the presence of noise it should avoid interference to operate If the copy is not successful it should recopy after clearing code. 4. The features of new copy remote control: The four buttons could respectively copy four different types of chips That is a remote control can operate four different types of facilities. The frequency is from 270MHz to 434MHZ and more than ten frequency points. Faster copy data speed not easy losing code far distance. 5.Clearing method: While holding down the two keys to unlock and lock (some shell is up and down two keys) LED flashing three times release any button pressed the other is not loose click the release button three times LED The indicator light enters the flashing status rapidly. At this time the memory data is cleared completely. After the data is cleared the remote controller will not light according to which button is pressed. Package List: 1 * Wireless Remote Control