Earthquaker Devices EarthQuaker Devices Avalanche Run V2 Stereo Delay & Reverb Pedal with Tap Tempo

The Avalanche Run V2 Stereo Delay & Reverb Pedal with Tap Tempo is a versatile, high-quality audio tool designed for musicians seeking to explore new sonic landscapes. With a delay time of up to 2 seconds, reverse delay, tap tempo with subdivision control, and a switchable true bypass or buffered bypass with five tail lengths, this pedal offers a wide range of sound manipulation options. The Avalanche Run V2 features a unique sound-on-sound style lo-fi looping mode and an assignable expression control that maps the expression jack to a control of your choice, including the toggle. The delay section provides a broad spectrum of sound, from tape emulation to bucket brigade styles, all adjustable with the wide-range Tone control. The pedal's plate-style reverb is reminiscent of the lush modulation found in our esteemed Dispatch Master, but with an adjustable Decay for added versatility. Access to otherworldly reverse delay and dynamic swelling reverb settings is made easy with a 3-way toggle switch. The Avalanche Run V2 is equipped with a variety of controls for fine-tuning your sound. The Time control adjusts the delay time from 0ms to just under 2000ms, while the Repeats control allows for zero repeats to near infinite. The Tone control adjusts the tone for the delay line only, allowing you to roll off highs to the left, roll off lows to the right, and achieve a flat response in the middle. The Mix control is the volume control for the delay line, blending in the wet with dry until 1 o'clock, boosting the wet signal over the dry from 1 o'clock to 3 o'clock, and bringing down dry until it is fully wet when all the way up. The Expression Jack Assign Switch maps the expression jack to one of the assigned controls, offering a wide range of sound possibilities. The Ratio Selector Switch selects delay subdivisions when time is set by the "Tap" switch, and the Decay control adjusts the decay length of the reverb. The Avalanche Run V2 also features a Mode Selector Toggle Switch for standard, reverse, and volume swell modes. The pedal is designed to run in mono, stereo, or mono in and stereo out configurations, and includes a TRS expression jack on the west side of the pedal. The Avalanche Run V2 is powered by Flexi-Switch Technology, a relay-based, true bypass switching style that allows for both momentary and latching style switching. This pedal is powered by a 9v center-negative 1-amp DC power supply for optimal performance. Each Avalanche Run V2 is meticulously assembled, wired, and tested by our dedicated team in Akron, Ohio, ensuring the highest quality and performance for your musical endeavors.