Eachine ET5 Mini Gasoline Stirling Engine Model Water-cooled Cooling Structure Science Education Toys

Description Brand EachineItem Name Eachine ET5 Mini Gasoline Engine Model Stirling Water cooled Cooling StructureSize 104 94 78MMDisplacement 1 6CC Cylinder diameter 13MM Itinerary 12MMWeight 1400GMaterial Brass And Stainless SteelThis is a mini engine It is made of brass and stainless steel Water cooled cooling structure The bore is 13MM The stroke is 12MM Thecarburetor with adjustable speed is used The ignition is powered by 4 5Vower supply Its starting can be divided into two ways external force electric drill and manual starting Features Engine Startup Steps 1 Check the wiring of the engine from the board connect the fuel tankpipeline and install a No 5 battery 5v 2 Use gasoline 95 to fill the fuel tank After the filling is completedturn the flywheel clockwise on the right side of the engine power switchsurface for many turns No air can be generated 3 Turn on the power switch and quickly rotate the flywheel clockwise onthe right side of the engine power switch surface to start the engine Precautions 1 If the ignition device is normal and the cylinder compression is normalif the machine cannot start normally it is very likely that the carburetor oilneedle needs to be adiusted 2 After tightening the main oil needle on the carburetor loosen 1 4 turand start the flywheel so that the mixing ratio of gasoline and air canreach the normal working mixing ratio 3 When the machine stops the power switch should be turned off Note 1 Due to the different di