EWRF e7082VM 5.8G 40CH 100mW Power Adjustable FPV Transmitter W/ Betaflight Cleanflight OSD

EWRF e7082VM 5.8G 40CH 100mW Power Adjustable FPV Transmitter W/ Betaflight Cleanflight OSD Description: Item number: EWRF e7082VM Frequency: 5.8G 40CH Transmitting Power: 100mw/OFF(Pitmode) Power supply: DC5V Current(5v): 170mA(100mW) Weight: 1.4g Standard size: 14*15*3mm Main Features: * Betaflight/Cleanflight OSD configuring parameter * Clean powerup and channel switching without interference to others * Smaller current: 100mw(5V power supply: 170mA) User Guide 1. LED indication * The red LED indicates the state of working mode or the item when setting the VTX(flashing 1 time means selecting the channels, flashing 2 times means selecting the bands). * The blue LED indicates the state of Pitmode or the value of item when setting the VTX ( e.g. when selecting the channels, 1 times of flashing means channel 3. When selecting the bands, 1 times of flashing means band A.) * The green LED flashing indicates that the VTX overheat protection is working, the power level will go down. 2. Working mode indication * After powering up, the red & blue LEDs will signal the following two items of VTX in turn: channel, band (the flashing times of the red and blue LEDs indicate the item and the value respectively). After that, the LEDs indicate the working modes. * Normal: The red & blue LED are on. * Pitmode:The red LED is on and blue LED is off. 3. Setting * The red LED flash 1 time which means the item of channel selecting, then press the button can select the channels(blue LED flashing times corresponds to the channel 1-8). * The red LED will flash 2 times which means the item of band selecting, then press the button can select the band(blue LED flashing times corresponds to the band A-F). For e7082VM, Betaflight/Cleanflight OSD setting of channel,band and Pitmode ,please referring to 'Betaflight OSD setting of EWRF Transmitter' for details. Frequency (Mhz) Band CH1 CH2 CH3 CH4 CH 5 CH6 CH7 CH8 A 5865 5845 5825 5805 5785 5765 5745 5725 b 5733 5752 5771 5790 5809 5828 5847 5866 c 5705 5685 5665 5645 5885 5905 5925 5945 d 5740 5760 5780 5800 5820 5840 5860 5880 E 5658 5695 5732 5769 5806 5843 5880 5917 Note: 1. Make sure that there is enough space for airflow when installing the module on the drone in case the overheating protection starts to reduce the power even to shut down at the worst. 2. Please install the antenna before powering up for a longer use life. Package Included: 1x EWRF e7082VM 5.8G 40CH 100mW Power Adjustable FPV Transmitter