ETCR1000D Stable Performance Lightweight Clearly Display 3-Phase Meter For Recording Studio Home Audio Outdoor DIY

ETCR1000D Stable Performance Lightweight Clearly Display 3-Phase Meter For Recording Studio Home Audio Outdoor DIY Specification: Condition: Item Type: Non-Contact Phase Detector Material: ABS Color: As shown in the picture Product Non-contact phase detector Functions Phase detection normal phase reverse phase and phase deficiency live wire examination simple power detection breakpoint location and line maintenance Power Supply DC 3V 2 x AA batteries LR6Not included continuously working for 70 hours Voltage Range AC 70～1000V 45～65Hz Sine Wave Continuous Input Clamp Wire Size Diameter: 10-40mm / 0.4-1.6in LED Display Positive Phase : The four phase- lamps in order clockwise. Negative Phase : The four phase- lamps in order counterclockwise. Line-voltage Indication: L1 L2 L3 lamp light up. Default Phase: L1/ L2/L3 lamp is off. Open Circuit: L1/L2/L3 lamp is off. Buzzer Positive Phase : The instrument emits intermittent short beeps Negative Phase : The instrument emits a continuous beep Battery Check After the power is turned on the POWER indicator is on: The battery is low. The LOW BATTERY light is on. Auto Power off After 5minutes the meter automatically cut off power supply. Meter Dimension 70x74x30mm/2.8x2.9x1.2in Clamp Length 0.6m/2ft Net Weight 256g/9oz Working Temperature and Humidity -10 degrees Celsius ～55 degrees Celsius ; below 80% Storage Temperature and Humidity -20 degrees Celsius ～60 degrees Celsius ; below 90% Maximum Measured Voltage AC 1000V Dielectric Strength 5.4kVrms Maximum Rated Power 300mVA Package List: 1 x Non-Contact Phase Detector 1 x Instruction Manual 1 x Leather Case Note: 1. Please allow 1-2cm error due to manual measurement. Thanks for your understanding. 2. Monitors are not calibrated same item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.