EPIC Carbon Weed Deflector

It's simple really, no weed = more speed! Avoid being slowed down by debris in the water. The simple and effective design of this Epic Carbon Weed Deflector will help shed weed and seagrass.
SPECIFICATION
LARGE - FOR USE WITH WEEDLESS & SURF RUDDERS
SMALL - FOR USE WITH UNIVERSAL RUDDERS
CAN ALSO BE FITTED TO SUIT MOST OTHER RUDDER BRANDS/TYPES
INSTALLATION
You can use epoxy from your local hardware store, but stay away from the quick setting types as they are not as strong. For a thorough bond, make sure the epoxy extends up the fin about 1/4" and out in a nice bead to the sides.
When aligning the fin it may be necessary to use tape to hold it in place while the bond sets. Some epoxy is thicker than others, but tape will ensure it doesn't move on you.
Make sure you sand the attachment point first. Get your epoxy ready (most products distribute the two components equally.) Mix your epoxy (be sure to stir it up thoroughly.) Apply a strip of epoxy at the attachment point. Apply more epoxy to the attachment point on the weed guard. Place the fin on the hull and align properly.