EJWQWQE Single Handle Bathroom Pull Out Faucet One Holes Modern Vanity Faucet Mixer Tap For Hot And Cold Water Faucets

Bathroom Pull Out Faucet Single Holes Modern Vanity Faucet Mixer Tap for Hot and Cold Water Copper Faucets Specification: Product Name: Bathroom Faucet Product color: Silver Material: Zinc alloy Net weight: 3.15lbs(1.43kg) Gross weight: 3.74lbs(1.70kg) Product Dimensions: 8.27x6.7x1.77inches (21x17x4.5cm) Packing size: 13.78x 7.87x 3.54 inches (34.5x20.5x9cm) Features: Modern Styling: Simple and generous styling adds to the aesthetic appeal of a space. Ergonomic design offer comfortable use experience. High quality faucet body and handle with excellent reliability. The surface treatment won t tarnish or scratch with excellent corrosion resistance. Dual-mode water outlet: Switch two water outlet modes at will through the button at the nozzle. Shower mode: delicate water outlet quiet water saving; Dc mode: soft water outlet quiet water saving Drip-free v-alve:There is a ceramic disc cartridge built-in the bathroom faucet hole Ceramic spool is resistant to aging and weara high seal performance cartridge v-alve provide you a smooth stream and low probability of leakage. Excellent process: thickened surface chrome plating process high temperature and anti-winding braided hose 23.62inch easy to pull let you clean the corners without omission Easy to Install: We have instructions for installation.This bathroom sink faucet is designed to fit 1-hole Adapted to 9/16 water supply connection if you connect it to 1/2 water supply please buy the 9/16 to 1/2 adapters seperately. Notice: p-op up drain is not included. Package Include: 1x faucet 1x sealing ring 1x shank 1x rubber mat 1x washer 1x lock mut 1x cold/hot inlet hose Installation Note: Applicable pressure: 0.05-0.6mpa Aperture: Φ32-35mm/Φ1.26-1.38inch Length of water inlet pipe: 500mm/19.69inch Handle Location:Single-Hole Deck-Mount Nominal pressure: 0.6Mpa Work pressure: 0.05Mpa-0.6Mpa Two flexible Hoses (Hot and cold) and 9/16 female thread V-alve core: Ceramic 1.The main body of the faucet has been tested and adjusted at the factory please do not disassemble it by yourself； 2.Before installing the water nozzle please first remove the impurities and sludge in the pre- embedded water pipe to avoid blocking the water nozzle and affect the water discharge. 3.After installation please confirm the joints are tightly connected and the pipeline without leaking . 4.The sizeof the table mounting hole suitable for the installation of this product ：Φ32mm-35mm/Φ1.26-1.38in 5. When installing and using the water nozzle ， please use normal torque to prevent the handle screw and other parts from breaking 6. Please open cold water first when using then turn on hot water to adjust temperature to avoid burns； all kinds of water nozzles are adjusted according to red and blue signs red is hot Water direction blue is cold water direction and your double pipes should be installed coordinate with these. 7. Users should protect the faucets if as cement lime slurry sand that contaminates the surface .It must be cleaned within 30 minutes. 8. Important: Before supply lines connection please turn on hot and cold water supplies and flush water lines for one minute. This flushes away any debris that could cause damage to internal parts. And then you can connect supply lines and slowly turn on the water check all the connections for leaks.