EDFRWWS Remote Control 4 Keys Copy Cloning Duplicator for Garage Door (315M Black)

315/433MHz Remote Control 4 Keys Copy Cloning Fixed Learning Code for Garage Door Gate Remote Controller Duplicator Key Feature: Using high-performance radio frequency chip crystal oscillator frequency stabilization accurate frequency point; Long transmission distance no directionality high transmission sensitivity no signal blocking; It can copy most of the fixed code and learning code wireless remote control the copy speed is fast and the operation is simple; After copying it will not affect the original remote control; Copy code automatically use directly no coding required; Copyable chip models: For 1.PT2242 2.PT2260 3.PT2262 4.EV1527 5.527 6.PT2240 7.SMC 918 8.HT-12E 9.AX 5326-3 10.AX 5326- 4. 11.AX 5026 12.HT600 13.HT680 14.HT6207 15.HT6010 16.HT6012 17.HT 6014 18.MC 145026 19.HT 640 20.SMC 926 21.HT12D Wireless remote control such as fixed code and learning code Specification: Model: AK-079A-KB Item: Four Button Copy Remote Control Color: Red Yellow Green Blue Black (optional) Working voltage: 6V Encoding type: copy Working frequency: 433M/315M (optional) Modulation method: ASK Number of keys: Four keys (five colors are available) Launch distance: 50m (in open environment) Range of use: duplication and regeneration of wireless remote controls such as barriers garage doors cars/motorcycles etc. Size: 56*32*11mm/2.2*1.26*0.43 Weight: 25g Operation Method: 1. Code pairing (learning): Place the original remote control and the copy it as close as possible first press a button of the original remote control and immediately after the indicator light turns on press and hold a button of the self-copy remote control for about 3s the LED will flash 3 times and then quickly flashing it means that the address code of the original remote control button has been learned successfully. The other keys are operated in the same way for learning. 2. Clear code: Press the unlock button and the lock button at the same time for 2s the LED light starts to flash 3 times. At this time keep the lock button pressed and release the unlock button. Press the unlock button three or four times within 5s and the indicator light flashes quickly. The code has been cleared. Test whether the existing code of the remote control has been successfully cleared: When you finish the clearing action you can press any button of the copy remote control. If the LED does not flash immediately at this time it will flash after 2s that means Copy the original code of the remote control has been completely cleared if the LED still flashes quickly it means that the code still exists and needs to be cleared again. 3. Restore the cleared code The copy remote control has a recovery function. If you accidentally clear the a