Dual Hole Car Cup Drink Holder Automobile Interior Beverage Bottle Mount, 501 Original

Dual Hole Car Cup Drink Holder Automobile Interior Beverage Water Bottle Mount Storage Stand Replacement AccessoryFeature:1. One in two design, one cup holder can be divided into two, which can make better use of the space in the car and effectively solve the problem of shaking of the original cup holder of the car;2. Adaptive elastic clip, suitable for cup / beverage bottle / milk tea cup / can / vehicle ashtray, etc;3. The elastic four finger grasping design will not shake or make the noise caused by the collision between the cup body and the water cup holder arm during driving;4. According to the different positions of the original cup holder of the automobile, the installation position of the cup holder base can be adjusted accordingly, and the base can be inserted and taken easily;5. The mechanical fixed base rotates in the direction of the blue arrow to extrude the support block with anti-skid sheet to fix the cup holder;6. It can be installed on the instrument panel and equipped with two pieces of double-sided adhesive tape. When removing the base, stick the double-sided adhesive tape on the bottom of the product and then stick it on the instrument panel.Specification:Material: ABSColor: BlackSize: cup body with diameter less than 70mm/2.8inApplicable model: GeneralInstallation method:1. Installed in the original cup seat;2. Find a suitable cup holder, adjust the cup holder base to a suitable position, and then put it into the original car cup holder. Finally, rotate the cup holder to bounce the fixing key in the base until it is fixed.Note:Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!Please allow 1-2cm measuring deviation due to manual measurement.Package Content:1 x Car Cup Holder