Double-ended Engraving Machine Pneumatic Engraving Machine Double Ended Impact Graver Jewelry Engraver

Features 1 engraving machine used for a period of time it should be the back of the machine reducing valvee cupsdrained 2 to mechanical oil adding an appropriate amount of the 10th size carved handle 3 If the fault not blindly demolished the staff checks and maintenance Specifications Power Supply AC 220V 110V option 50 60HzPower Consumption 75WDiameter L W H 260 210 250 mm Packing Size 315 270 250mmAiir Pressure 0 3kg cm cmRotate Speed 100 4000RPMWeight 8kgVoltage 220v 50 60HZAccessories Handpieces 2PCS Foot Control 1PC Cable 1PC Installation 1 size carved handle Foot opening panel interface connector 2 the aiir compressor trachea insert aiir intake on the back of the engraving machine it is recommended that theinstallation of relief valves and water separation filter aiir compressor and engraving machine pipeline toincrease machine performance Operation 1 The first pressure adjustment knob and rotate the handle switch shut down to avoid the pressure too greatdamage to the pressure in the table and the pressure relief valvee2 power turn on the power switch Light 3 the position of the changeover switch is set to 1 or 24 adjust the aiir pressure and speed hand carved handle by stepping foot switch to adjust the pressure knobslowly Pressure gauge indicates 1 5 2KG CM2 adjust the speed knob at the same time the combination of the two regulation carving handle the biggest impact pressure adjustment knob is pressed 5 the relaxing foot switch carving the