Divinext Rj45 Rj11 Rj12 Cat5 Cat6 Utp Network Cable Tester with Battery Ethernet Network LAN Cable Tester for LAN Phone Wire, Network Line, Telephone Line, Bnc Cable, Rj45 Rj11 Rj12 Cat5 ADSL Cable Portable Detachable Cable Testing Tool Network Interface

Cable tester is designed to test the wire circuit state of network line, telephone line, BNC cable, such as open short, cross, etc. This model adopt Automatic scan model, which can rapidly get a test result. Test of double-twisted cables: Switch on the power. (S is slow automatic grade, Mis manual.) Put cables into both main tester and remote tester. The lights of the main tester will turn on sequent form 1 to G. Main tester: 1-2-3-4-5-6-7-8-G Remote tester: 1-2-3-4-5-6-7-8-G RJ45 1-2-3-4-5-6 RJ11 Following are abnormal connections: If one cable, for example cable NO.3 is open circuited, the two NO.3 lights of the main tester and remote tester will not turn on. If several cables are not connected, several lights will not turn on respectively. If less than two cables are connected, none of the lights is on. If two ends of a cable is disordered, for example NO. 2and NO. 4, then displays on: Main tester: 1-2-3-4-5-6-7-8-G Remote tester: 1-4-3-2-5-6-7-8-G If two cables are short circuited, neither of the corresponding lights is on of the remote tester while main tester remains unchanged. If three cables, including three, are short circuited, none of the corresponding lights is on. If test patch panels or wall plate outlets, two cables which can match each other (RJ45) will be connected to the tester. If test cables of the same axes, BNC turns on when the cable works. Technology parameter: Detected Cable type: RJ11 & RJ45 Power supply: 9V battery included Size: 10.6*10.3*2.7mm Weight: 145g without battery