Digital to Analog Audio Converter Toslink Coaxial Optical Fiber Decoder, 501 Original

Digital to Analog Audio Converter Toslink Coaxial Signal Optical Fiber Decoder 5.1 Channel R/L RCA 3.5mm Stereo Adapter Feature:1. This DAC Converter Converts Coaxial or Toslink Digital Audio Signals to Analog L/R Audio and Can Be Connected to External Devices Such as Amplifiers via a Standard RCA-Type Jack, You Can Also Choose 3.5mm Headphone Jack Output, Connect High-Fidelity Headphones, It\\'s Ideal for Home or Professional Audio Switching.2. Bidirectional Switch Design Makes It More Than a DAC Converter, Not only Supports Digital to Analog, Also Supports Digital to Digital (Support Toslink to Coaxial and Coaxial to Toslink) PLEASE NOTE: This Converter Supports Digital to Analog BUT NOT Support Analog to Digital.3. Supports Volume Adjustment: Built-in High-fidelity Amplifier Chips, L/R and 3.5mm Output Can Drive 16~150ohm Impedance Headphone/Sound. Supports Volume Control, Volume Control Knob Just for Adjusting the Volume of the Headphone Interface and RCA Interface, Not for Coaxial or Toslink.4. Plug and Play: Comes with 4.0 OD Optical Cable, Coaxial Cable and Power Adapter, No Need to Install Extra Programs, Just Plug and Play(Note: This Converter Doesn\\'t Support 5.1 Channel Such as Dolby and DTS; Please Set the Audio Output to PCM or LPCM Before Using; for PS4 Pro and PS4 Slim Can\\'t Use This Converter).5. 192KHz Sampling Rate Achieved: With Volume Knob, You Can Adjust the Volume of RCA L/R + 3.5mm Jack Audio Output, Convenient to Use (Note: CANNOT Control the Toslink or Coaxial Audio Output). It Actually Supports Sampling Rate at 32, 44.1, 48, 96 and 192 KHz, and 24-Bit S/PDIF Incoming Bit Stream on Left and Right Channels.Specification:Type: Audio Adapter/ConverterMaterial: AluminumOutput interface: R/L RCA, Toslink, Coaxial, 3.5mmSignal Sampling Rate: 32-192 KHzBit Rate: 16-24 BitOutput Impedance: 16-300 ohmWorking Voltage: 5VPacking Size: 150 X 120 X 27mm/5.91 X 4.72 X 1.06\\\"Weight: 124gWarm Tip:1. There is a power switch on the volume knob, please turn on the power switch before using the DAC.2. Please set the Audio Output to the PCM/LPCM Format.3. For Samsung TV, if there is no sound even you set the audio output to the PCM/LPCM format, please turn ON the TV external speakers (Menus-Sounds- Speaker Setup- HESB/external speaker-ON).4. This converter doesn\\'t Support 5.1 Channel Such As Dolby and DTS.5. For PS4 Pro and PS4 Slim CANNOT use this converter as they haven\\'t Optical fiber output interface.Note:1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!2. Please allow 1-3mm measuring deviation due to manual measurement.Package Content:1 X Digital to Analog Converter 1 X Optical Fiber Cable1 X USB Power Cable