Digital Wattmeter Energy Meter Power Consumption Electricity Socket Outlet, 501 Original

Digital Wattmeter Wattage KWh Energy Meter Power Consumption Monitor Electricity Analyzer Test Measuring Socket OutletSpecification:Material: ABS + electronic componentsSize: 98*76*52mmPower supply: 230V-50HzMaximum load: 16A, 3680WMinimum power display: 0.1WMeasuring power accuracy: +/- 2% or +/- 2W (0-100W); +/- 2% (100-3250W)Power accuracy: +/- 2%Minimum power display: 0.01KWhAccumulated power range: 0.00-9999.9KWhPrice range: 0.00-9999Caveat: Do not connect two or more instruments together!Do not plug in equipment with a load exceeding 16 A.Always make sure that the plug of any device is fully inserted into the socket of the meter.If you need to clean the meter, please unplug it from the power supply and wipe the meter with a dry cloth.Keyboard definition: 1). Setting: Use the up button to set the price.2). Mode: Switch display status.3). Up: Set the price via the \\\"SET\\\" button.General characteristics: 1). Display line power.2). Display and store the accumulated total power.3). Display and store the price of the total power.Data Display: Press the MODE button, the data is displayed as follows:W-KWh-Price-COST / KWH1). Plug in the socket and turn on the power, the meter will display the active power.2). Press the MODE button again and release it, the meter will display the accumulated KWh.3). Press the MODE button again and release it, the meter will display the total power.4). Press the MODE button again and release it, the meter will display COST / KWH.Set fee/KWh price: 1). Press the SET button when COST / KWH is displayed, the first number COST / KWH flashes, press the UP button to set.2). Press the SET button again and release, the second number COST/KWH flashes, press the UP button to set.3). Press the SET button again and release, the third time COST/KWH flashes, press the UP button to set.4). Press the SET button again and release, the fourth time COST / KWH flashes, press the UP button to set.5). Press the SET button again and release, the decimal point COST / KWH flashes, press the UP button to set.Data erasure: Press and hold the MODE button for 5 seconds, KWh, PRICE and COST/KWh data will be cleared.Note:Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!Please allow 1-3cm measuring deviation due to manual measurement.