Digital Coffee Refractometer Brix 0-50 TDS 0-25 Refraktometer Kopi Cocoa Coffe Sugar Salt

Dikirim dari Jakarta dengan kardus extra utk keamananx000DSemua produk dari kami bergaransi distributor Jakartax000Dx000Dx000DRefraktometer Kopi dengan rentang pengukuranx000DKadar Brix Kopi 0-50 %x000DKadar TDS Kopi 0-25%x000Dx000DAlat yang praktis untuk komersial, industri F&B, hobyistx000Dx000Dx000D====x000DSpecifications: x000DRange: x000DBrix: 0-50% TDS:0-25%x000DResolution: +- 0.02Cx000DAccuracy: 0.1Cx000DAmbient temperature: 10-100 degreesx000DMeasurement Time: Approximately 1.5 secondsx000DMinimum Sample Volume: 2 metric dropsx000DLight Source: Yellow LEDx000DSample Cell: Stainless steel ring and flint glass prismx000DEnclosure Rating: IP65x000DBattery Type / Life: 9V battery for +- 5000 readingsx000DAuto-Off: After 3 minutes of non-usex000DDimensions: 5825121mmx000DWeight: 350gx000Dx000Dx000DProduct featuresx000DCoffee concentration with the range of 0-25%, Brix measurement with the range of 0-50% with temperature displayx000Dx000DCalibration function and no need calibration every time; auto power off within one minute if no any operationx000Dx000DProvided with suction tube and spare protective coverx000DThe function keys are simple, clear and easy to operate; high accuracy and durablex000Dx000DDigital screen with large display number, battery power can be displayedx000Dx000DProduct descriptionx000D1.Power On: Press key "READ" 1 second only.x000Dx000DScale converting: press key "SCALE" 1 second to choose the unit Brixor Concentration, "S01" is for Brix %, this also can test all liquid with sugarsuch as juice, milky tea ect, range is 0-30%. "S02" is for coffeeconcentration, range is 0-25.x000Dx000DMeasurement: Use suction tube takes some sample from the 1/2 deep ofthe cup (to avoid the cream or solid of the coffee), drip about 3~5 drops tothe sample plate, then cover it. Press key"READ" 1 second, meter will give the current value, ifpress key"READ" 2 seconds more, meter will make andcountdown 15 times' measurements, the reading is the average value.x000Dx000DTemperature unit converting: Press key "SCALE" more than 2 seconds,meter will display Celsius or Fahrenheit.x000Dx000DCalibration: No need calibration every time. Drip 3~5 drops distilledwater in sample plate, make sure the water and meter temperature is same andstandard temperature is 20C, then cover it. Press key "CAL" more than 2seconds until "CAL" flashing,press "CAL" key again, meter will display "END"and show 0.0%.x000Dx000DPower off: Meter will power