Dental Sandblaster AIR ABRASION Polisher Prophy Sandblasting 4 Hole Connect

Products Description This polisher makes the surface of porcelain metal and composite materials Micro-roughened by the alumina powder before pasting. It improves its adhesive strength. Installation Insert the 4 holes connector to the 4 holes cable in the dental chair then fix it the installation is finished. caution: You must check if there is remaining water in the 4 holes cable before installation. If there is you must dry itfirstly then install it. Recommended powder We recommend a particle size of 30 to 50 μm high purity powder (99%+). It s easy for the powder to absorb moisture from the air It would cause agglomeration resulting in performance degradation. After install the powder you should closed the cover of the bottle immediately to make sure its tight cover. The dry powder should flow freely the wet powder does not flow easily or lumps. Extraoral application For surface cleaning and micro-roughening treatment before pasting metal/Porcelain Fiber post Inlay/Onlays maryland bridge Orthodontic bracket removing the cement in the original adhesive layer before second pasting Cast metal prosthesis defect detection Application in oral In the repair treatment micro roughen surface of porcelain or composite. Package: 1 * Handpiece 1 * Powder Jar 1 * 3 meters PU cable with 4 Hole Connector 1 * mini wrench 1 * Nozzle