Damaged Plug Remover Tool Multifunctional Puller Adapter Hex Wrench Drills And Taps Plug Tip Puller Kit For M8x1mm And M10x1mm Threads

Damaged Plug Remover Tool Multifunctional Puller Adapter Hex Wrench Drills and Taps Plug Tip Puller Kit for M8x1mm and M10x1mm Threads Specification: Item Type: Plug Removal Tool Compatibility: Compatible for -Benz for for for for GM for Vauxhall for Opel for for Rover and any suitable use the size of the car etc. Accessories Include: Puller Housing Bit Holder Adapter Puller Adapter Mandrel 2 pcs/set Guide Drill Centering Sockets 2 pcs/set Hex Wrench 3mm Star Socket Bit e10 Drill Bit 7mm/5.5mm Drill Bit 9mm/5.5mm Ratchet T Bar Guide Drill 2pcs/set Tap M10x1.0 Tap M8x1.0 Tap 1/4in-28unf How to Use: 1. Select socket 4 install into the plug use a hammer to secure the plug head to remove the plug then try to remove the plug with a 3/8in driver socket. 2. This tool is especially suitable for removing the plug but only the head then please use other accessories to take the rest of the plug out of the plug hole and replace it with a new one. 3. Insert the No.6 tube into the plug hole then insert a No.10 3.5mm drill bit into the No. 6 tube and then drill with an air tool. 4. Separate the No.9 device and only select the cone tool to install it into the plug hole. Choose a suitable drill bit from the No.2 drill 7x5.5 or 9x5.5 and insert the drill into the No. 8 drill setter. It is important to use a size No.5 3mm small hole key to lock the screws on the drill bit setter. Then install it into the tapered center tool and connect with the air tool to drill holes and remove the hex nuts from the plugs. 5. Select the 1/4in-28 UNF tab from No.7 and insert the No.1 T handle. To install it into the plug hole turn the T handle clockwise to drill the hole. After get off work just adjust the key on the T handle and remove the T handle counterclockwise. 6. Select tool No.9 there are 12mm hex and 30mm hex nuts and tapered center tools. Thread the No.12 1/4in-28 UNF Hex 9mm into the 12mm hex spindle and use a 9mm wrench to tighten the 12 . Install the tapered center tool and 12mm hex into the plug hole. Then properly tighten the M30 hex nut. Use an M12 wrench to secure the hex No.12 head and use an M30 wrench to turn the M30 hex nut clockwise to pull the rest of the plug out. 7. Choose a tap from size 7 M10x1.0 or M8x1.0 install it with the T handle and tap the plug hole. 8. Remove the T handle and replace with a new plug. Package List: 1 x Plug Removal Kit 16PCS Tools 1 x Storage Box