DT300 WIFI Double Layer Decker Tracked Model Robot Tank DIY Kit Compatible With Arduino UNO R3

Please choose the version you want: A: Gold Chassis B: Gold Chassis + Espduino kit C: Gold Chassis + NodeMcu Lua kit D: Silver Chassis E: Silver Chassis + Espduino kit F: Silver Chassis + NodeMcu Lua kit Introduction: This tank chassis named DT300 can be controled by ESPduino development kit, which is completely compatible with Arduino UNO R3 attached with WIFI module. When you get it, you can remote control the tank chassis by using the WiFi mode after you install the car chassis. By using ESPduino development board kit, you can control the 2-way motor and 16-way servos at the same time. So, this kit is usually use to control the mobile robot arm. Specifications: Name: Double Layer DT300 Material: aluminum alloy Wheel: metal Track: plastic Product size: about 290*270*100mm (length * width * height) Motor Parameters: Name: 25mm gear motor Output speed: 15010%rpm No_load current: 200mA (Max) Stall current: 4500mA(max) Stall torque: 9.5kgNaN Rated speed: 10010%rpm Rated torque: 3000gNaN Rated current: 1200mA (Max) Noise :56dB Working voltage: 9V Outside Shaft Length: 14.5mm Shaft End Play: 0.05-0.50mm Screw Size: M3.0 Diameter Of Shaft phi 4mm, D3.5 Encoder: 2pulses/circle Working voltage for sensor: 3-5V Note: The tank car chassis is not assembled. Track can be connected by any length with a needle. Some useful links: ESPduino link (including doitcar Arduino firmware): click here 2-way & 16-way motor shield: click here APP and how to use the car: click here Installation for tank chassis: click here Package included: 1 set Tank Car Chassis (including motor) kit