DK-W1308 12V 10A Digital Dual LED Thermostat Temperature Controller for Incubator Cooling Heating Switch Thermostat NTC

Description 1 Connect the power supply and load according to the instructions Be careful not to overpressure and overload 2 Setting mode long press SET for 5 seconds will display P0 Short press SET to set H red light to heating mode C green light to cooling mode3 Set the stop temperature press the SET screen once Press the up and down keys to directly set the desired temperature 4 ENT is the confirmation button Press and hold this button to realize the function of power on off Technical Parameters Temperature control range 50℃ 120℃Resolution 9 9 to 99 9 hours 0 1℃ Other temperature range 1°CTemperature measurement accuracy 0 2 FSTemperature control accuracy 0 1°CRefresh rate 2 times secInput power 12VMeasurement input NTC10K B3950 1 meter waterproof sensorOutput type relay output maximum capacity 10AEnvironmental requirements temperature 30 60° C humidity 20 85 Machine size 100 48 28mmOpening size 27 22mmParameter Function Press and hold SET for 5 seconds to enter the internal parameter setting press the up and down keys to switch P0 P8 Press ENT to confirm the return CodeCode DescriptionSetting rangeFactory settingP0working modeC HCP1hysteresis setting0 1 302P2limits the maximum setting120120P3limited minimum setting 50 50P4temperature correction 10 0 10 00P5delay start0 100P6high temperature alarm 55 120offP7data lockon offoffP8factory reset on offoffP0 cooling and heating modeHigh temperature start for cooling mode please set to