DIY Solder Paste Syringe SMD/PCB Board Repair Welding Liquid Flux Grease, 501 Original

DIY Solder Paste Syringe 183-Degree SMD/PCB Board Repair Stencil Welding Liquid Flux Grease SuppliesFeature: What is solder paste? 1. Solder paste is a new type of solder material brought by SMT. 2. Solder paste is a complex system composed of solder powder, flux and other additives. 3. At room temperature, the tin paste has a certain viscosity and can initially adhere the electronic components to the predetermined position. 4. At welding temperature, through the evaporation of solvents and some additives, the welded components are welded together with the printed circuit board (permanent connection).Specification: Net weight: 38gSize: 102*17mm/4.02*0.67inScope of application: repair SMD, PCB board repair workIndication: 1. Before opening the seal, the solder paste temperature should be raised to the ambient temperature (above 25 ℃), and the temperature recovery time should be about 3-4 hours. It is forbidden to use other heaters to heat up instantly. 2. After opening the tin paste, it is recommended to use it within 24 hours at room temperature. 3. If you keep it in the air for a long time, the tin paste will become a tin block due to moisture absorption. 4. The indoor temperature is controlled at 22-28 ℃ and the humidity RH30-60% is the best working environment. 5. Wipe the wrong substrate, it is recommended to use industrial alcohol or industrial detergent.Note:The list is only one bottle.Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!Please allow 1-2cm measuring deviation due to manual measurement.Package Content:1 X Solder Paste Syringe